Original version V101.

le 30/05/22 V102 

Le color wheel channel is added to the manual mode. 

			
	ManCtrl	Dimmer=     000-255			
		Strobe=     000-255			
		Zoom=       000-255			
		Red=        000-255			
		Green=      000-255			
		Blue=       000-255			
		White=      000-255			
		Color Wheel    			
		10000K	001		
		8000K	002		
		6500K	003		
		5600K	004		
		5000K	005		
		4500K	006		
		4000K	007		
		3200K	008		
		3000K	009		
		2700K	010		
		Virtual color wheel	011-0250	

LE 27/10/2022  V103

The improved points:
- Optimized the RDM function and solved the flash issue.(no good)
	
Le 03/01/2023 V104
- solved the flash issue		

24/10/2024	V105
- improved zoom adjustment in manual mode

15/03/2025	V106
- In case of temperatures below 0° it could happen that the zoom did not reset correctly and therefore the led could not light up and the warming up time could be quite long since the only heat source was the motors.
With this new version there are 2 possibilities selectable in the menu, either for a standalone use "ColdStart Auto", or for a live use with a console "ColdStart Manual".

- ColdStart Manual: If the temperature is < 0° and the zoom reset fails after 100 seconds, the display shows "ZOOM ERROR" but it is possible to light the led to warm up the ParKolor more quickly. A reset via the dmx or by the menu can be done without turning off the led.

- ColdStart Auto: If the temperature is < 0° and the zoom reset fails 100 seconds, the display shows "ZOOM ERROR" but it is possible to turn on the led to warm up the ParKolor more quickly. Once the temperature is > 0°, the zoom will reset automatically without turning off the led.